Lead4Pass has updated Cisco 350-501 dumps issues! The latest 350-501 exam questions can help you pass the exam!
All questions are corrected to ensure authenticity and effectiveness! Download the Lead4Pass 350-501 VCE dumps or PDF dumps: https://www.lead4pass.com/350-501.html (Total Questions: 190 Q&A 350-501 Dumps)
Cisco 350-501 Practice testing questions from Youtbe
Latest Cisco 350-501 google drive
[PDF] Free Cisco 350-501 pdf dumps download from Google Drive: https://drive.google.com/file/d/1OnBb9I2qIbSg248c63fHtchcZUFR1lQk/
Get more complete Cisco CCNP exam certification practice questions：https://www.vcecert.com/cisco-dumps/
The latest update of Cisco 350-501 exam questions and answers and official exam information tips
QUESTION 1
DRAG-DROP
Drag and drop the functionalities from the left onto the correct target fields on the right.
Select and Place:
Correct Answer:
QUESTION 2
Which configuration modifies Local Packet Transport Services hardware policies?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-1/addr_serv/command/reference/b_ipaddr_cr41crs/b_ipaddr_cr41crs_chapter_0111.html#wp1754734006
QUESTION 3
Refer to the exhibit. An engineer is preparing to implement a data plane security configuration. Which statement about this
configuration is true?
A. Router 2 is the router receiving the DDoS attack.
B. Router 1 must be configured with uRPF for the RTBH implementation to be effective.
C. Router 1 is the trigger router in an RTBH implementation.
D. Router 2 must configure a route to null 0 for network 192.168.1.0/24 for the RTBH implementation to be complete.
Correct Answer: D
QUESTION 4
Which three OSPF parameters must match before two devices can establish an OSPF adjacency? (Choose three.)
A. IP address
B. subnet mask
C. interface cost
D. process ID
E. area number
F. hello timer setting
Correct Answer: BEF
QUESTION 5
Which statement about segment routing prefix segments is true?
A. It is the longest path to a node.
B. It is linked to an adjacency SID that is globally unique within the router.
C. It is linked to a prefix SID that is globally unique within the segment routing domain.
D. It requires using EIGRP to operate.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/segment-routing/configuration/guide/b-segrouting-cg-asr9k/b-seg-routing-cg-asr9k_chapter_010.pdf
QUESTION 6
Refer to the exhibit. Which statement supports QPPB implementation?
A. QPPB policies affect only egress traffic.
B. QoS policies rely exclusively on BGP attributes to manipulate traffic.
C. QoS policies are identified in the MPLS forwarding table.
D. QoS policies use BGP to gain full coverage on the network.
Correct Answer: B
The QoS Policy Propagation via BGP feature allows you to classify packets by IP precedence based on the Border
Gateway Protocol (BGP) Attributes like community lists, BGP autonomous system paths, and access lists.
QUESTION 7
Refer to the exhibit. Which configuration prevents the OSPF neighbor from establishing?
A. default-metric
B. duplex
C. network statement
D. MTU
Correct Answer: D
QUESTION 8
What are two factors to consider when implementing NSR High Availability on an MPLS PE router? (Choose two.)
A. It consumes more memory and CPU resources than NSF
B. It operates normally without NSR support on the PE peers.
C. It requires all PE-CE sessions to support NSR
D. It requires routing protocol extensions
E. It cannot sync state information across redundant RPs
Correct Answer: AB
QUESTION 9
Refer to the exhibit. A network engineer is implementing a BGP routing policy. Which effect of this configuration is true?
A. All traffic that matches acl10 is allowed without any change to its local preference.
B. All traffic that matches acl10 is dropped without any change to its local preference.
C. If traffic matches acl10, it is allowed and its local preference is set to 300.
D. All traffic is assigned a local preference of 300 regardless of its destination.
Correct Answer: A
QUESTION 10
A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and
other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an
engineer apply?
A. router-policy CISCO if destination in SUBNET then drop
else
set med 400
set community (4:400) additive
endif
end-policy
end
B. router-policy CISCO if destination in SUBNET then
drop
endif
set med 400
if community matches any SUBNET then
set local-preference 400
set med 500
set community (4:400) additive
endif
end-policy
end
C. router-policy SUBNET if destination in SUBNET then
drop
endif
set med 400
set local-preference 400
if community matches any SUBNET then
set community (4:400)
endif
end-policy
end
D. router-policy SUBNET if destination in BGP then drop
else
set med 400
set community (4:400)
endif
end-policy
end
Correct Answer: A
QUESTION 11
Refer to the exhibit. A network operator working for a service provider with an employee id: 1234:56:789 applied this
configuration to a router.
Which additional step should the engineer use to enable LDP?
A. Enable MPLS LDP on the interface.
B. Disable Cisco Express Forwarding globally.
C. Delete the static router ID.
D. Configure both keywords to enable LDP globally.
Correct Answer: A
QUESTION 12
Refer to the exhibit.
A network operator must configure CSR1 interlaces GigabitEihernet2 and GigabitEthemet to rewrite VLAN tags 12 and
21 for traffic between R1 and R2 respectively. Which configurator accomplishes this task?
A. Option A
B. Option B
C. Option C
Correct Answer: C
IF bridge domain on both interfaces are 10
QUESTION 13
Refer to the exhibit. Router 1 was experiencing a DDoS attack that was traced to interface gigabitethernet0/1. Which
statement about this configuration is true?
A. Router 1 accepts all traffic that ingresses and egresses interface gigabitethernet0/1.
B. Router 1 drops all traffic that ingresses interface gigabitethernet0/1 that has a FIB entry that exits a different
interface.
C. Router 1 accepts source addresses that have a match in the FIB that indicates it is reachable through a real
interface.
D. Router 1 accepts source addresses on interface gigabitethernet0/1 that are private addresses.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nxos/security/configuration/guide/sec_nx-os-cfg/sec_urpf.html
Summarize:
This blog shares the latest Cisco 350-501 exam dumps, 350-501 exam questions and answers! 350-501 pdf, 350-501 exam video! You can also practice the test online! Lead4pass is the industry leader!
Select https://www.lead4pass.com/350-501.html Lead4Pass 350-501 exams Pass Cisco 350-501 exams “Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)”. Help you successfully pass the 350-501 exam.
[Q1-Q13 PDF] Free Cisco 350-501 pdf dumps download from Google Drive: https://drive.google.com/file/d/16Yq3vPpzXGqd8Fg-rz9VO2sLc0qoigSq/